The choice between a chiller or a cooling tower depends on the specific needs and conditions of your injection molding plant. Here is some information about both options for your reference:

Chiller:

1. The chiller provides cooling effect through the circulating water cooling system. They use refrigerant to lower the water temperature and remove the heat through a cooling cycle.
2. Chillers are usually compact, take up less space, and are relatively simple to install and maintain.
3. They are suitable for small or medium-sized injection molding factories, especially where space is limited.
4. Chillers can usually provide stable temperature control and have high cooling efficiency.

   Cooling Tower:

   1. The cooling tower achieves the cooling effect by spraying hot water discharged from the injection molding machine on the filler and using air to flow through the filler. Through this process, the heat in the water is transferred to the air and dissipated.
   2. Cooling towers usually require a large space to accommodate the tower structure and packing.
   3. Cooling towers are suitable for large injection molding factories, especially when large amounts of hot water need to be processed.
   4. The initial investment cost of a cooling tower is usually low, but the operating and maintenance costs may be high.

      When choosing between a chiller or a cooling tower, you should consider the following factors:

      1. The scale and production capacity of the injection molding factory.
      2. Available space and equipment installation requirements.
      3. Temperature control accuracy and stability requirements.
      4. Budget restrictions on initial investment costs and operating costs.
      5. Local climate and environmental conditions.

      The best option depends on your specific circumstances, you can consult us for free.